The honeycomb panel's sandwich structure (face + aluminum honeycomb core + back) gives lightweight and high flatness — ideal for high-rise curtain walls, ceilings and commercial forms. ASPER aluminum veneers use fluorocarbon coating, support CNC bending, perforating and wood/stone transfer, fabricated to CAD/PDF for malls and landscape forms.
| Face | 3003 / 5005 aluminum alloy |
|---|---|
| Core | aluminum honeycomb (low weight, high rigidity) |
| Thickness | face 1.0–3.0mm, total 10–50mm |
| Finish | fluorocarbon / powder / wood-stone transfer |
| Form | flat / shaped / perforated / column |
| Use | curtain wall / ceiling / facade / column |
light, flat, strong wind-load rigidity
UV stable, long colour life outdoors
CNC bend & perforate, free forms
site hanging, short schedule, precise fit
Honeycomb is composite, lighter/flatter; veneer is single sheet, better for forms.
Fluorocarbon outdoors, powder indoors, wood/stone transfer available.
Yes, CNC bend and perforate, column wraps custom.
High rigidity, wind-load capable, meets facade specs.
Face 1.0–3.0mm, total 10–50mm by span/form.
Yes, CAD/PDF detailing, Sanshui source factory.
图纸深化 → 打样确认 → 批量交付 → 现场验收，全程有兜底
24 小时内出具三表联动报价单（参数设置表 + 综合单价分析表 + 工程量清单）
邮箱 jeson2002@126.com ｜ 广东省佛山市三水区云东海街道驿北路5号碧桂广场一区12座209之一